Disadvantages of Blow Molding

Blow molding is the process in which hollow, plastic containers are made. Air is blown into molds to form items such as thermoplastic bottles, tubing and milk jugs. While blow molding allows companies to manufacture high volumes of plastic containers, which are significantly cheaper than glass, there are a few disadvantages to the process. Some disadvantages include environmental hazards and a significant dependence on petroleum.

Environmental Disadvantages

Plastic products made by the process of blow molding aren't biodegradable, which presents an obvious environmental hazard, especially when empty containers find their way to landfills. When disposed of in landfills, plastic products are buried and remain in the earth forever. Their oil-based material then becomes part of the soil and runs the risk of threatening plant life, animals and groundwater.

Dependence on Petroleum

Aside from the gasoline industry, plastic manufacturers depend on millions of gallons of petroleum in their quest to produce blow-molded products. Because oil is the most important agent in thermoplastics and blow molding is becoming more streamlined and automated, the process plays an ongoing threat on a diminishing world oil supply.

Process and Material Limitations

Although blow molding has been automated and can produce mass quantities of products, the process is largely limited to hollow forms. These forms are delicate and contain various thicknesses which must be precise, which often results in wasted material in the process of arriving at containers with proper dimensions and specifications. In some cases, thermoplastic is stretched to save on material, which can lead to substandard containers.

      skype: lee.ivy66

      ivylee886@gmail.com

Free Technology Co., Ltd
http://www.freetech-mould.com

The Stages of Blow Moulding

today virtually all cast plastic parts are manufactured using blow molding technology.

Blow molding is a process used to cast plastic parts that are hollow. Since 1942 when the first polyethylene bottle was produced using blow molding technology, blow molding has become the standard manufacturing process for making cast plastic parts. Blow molding involves the fabrication of a tube made of molten plastic called parison. The next stage of the process is to shape the tube into the desired form using one of several blow molding processes.

Heating The Resin

The first step in any blow molding process is to heat the resin. Thermoplastic resin is heated to about 400 degrees. Once the resin reaches its molten state, it is extruded over a die head. The die head forces the thermoplastic resin to flow around it, thus creating a hollow center in the resin. The resin has now formed a tube called parison.

Molding

The parison is then placed inside a pre-determined mold. The interior shape of the mold cavity is what will ultimately determine the shape of the finished casting. The mold is then closed around the parison. At this point in the process, the parison is still very warm. The mold however, is cooled with water.

Inflation

Compressed air is then blown into the mold. The air fills the center of the parison tube and forces the sides to expand, thus conforming to the shape of the mold interior. The parison is still very warm at this point to allow it to expand without breaking. As the warm parison expands to meet the cold walls of the mold, it freezes off and becomes rigid.

Cooling

Once the warm parison has cooled off, it solidifies inside the mold. Once properly cooled, the parison will maintain the form in which it was cast. The mold can now be opened and the finished plastic component removed.

hinjection molding, mold shop tool maker :http://www.freetech-mould.com

The Plastic Manufacturing Process

1.                            Plastic Injection Molding Process

Injection molding is one of the main methods by which parts are manufactured from plastic. The first step in the injection molding process is to feed plastic pellets into the hopper, which then feeds the pellets into the barrel. The barrel is heated and contains a reciprocating screw or a ram injector. A reciprocating screw is typically found in machines that produce smaller parts. The reciprocating screw crushes the pellets, making it easier for the plastic to be liquefied. Toward the front of the barrel, the reciprocating screw propels the liquefied plastic forward, thereby injecting the plastic through a nozzle and into the empty mold. Unlike the barrel, the mold is kept cool to harden the plastic into the correct shape. The mold plates are held closed by a large plate (referred to as a movable platen). The movable platen is attached to a hydraulic piston, which puts pressure on the mold. Clamping the mold shut prevents plastic from leaking out, which would create deformities in the finished pieces.

2.                            Plastic Extrusion Molding Process

Extrusion molding is another method of manufacturing plastic components. Extrusion molding is very similar to injection molding and is used to make pipes, tubes, straws, hoses and other hollow pieces. Plastic resin is fed into a barrel where it is liquefied. A rotating screw propels the liquefied plastic into a mold, which contains a tube-shaped orifice. The size and shape of the tube determines the size and shape of the plastic piece. The liquefied plastic then cools and is fed through an extruder, which flattens the plastic and forms the piece into its final shape.

Issues That Arise in the Plastic Manufacturing Process

A number of complications can arise during the plastic manufacturing process, including burned parts, deformities, surface imperfections and brittle parts. Parts become burned when the molds are not kept cool or if the melting temperature in the barrel is too high. Additionally, if the reciprocating screw becomes jammed or is not rotating fast enough, liquefied resin will remain in the barrel too long and become scorched. Surface imperfections and deformities occur when the surface temperature of the mold is uneven, if the molds are not clamped tightly enough or if the melting temperature is too high. Brittle pieces are formed when not enough liquefied resin is injected into the mold or if the plastic hardens before the mold can be filled. Regular testing and calibration of injection and extrusion molding machines is critical to ensure that the process runs smoothly.

http://www.freetech-mould.com/Successful%20Case.html

what's blow molding

Plastic blow molding technique is developing rapidly for plastic process . The thermoplastic resin obtained by extrusion or injection molding of plastic tubular parison hot ( heated or softened state ) , placed inside the mold cavity , then closed mold immediately, pour into air, blowing the plastic parison inflation and close to the inner wall of the mold cavity, cooled mold , that get all kinds of hollow plastic products.

 Technical Overview     Blow molding process during World War II began for the production of low-density polyethylene vial. In the late 1950s , with the development of high-density polyethylene birth and blow molding machines , blow molding technology has been widely used. Hollow container volume up to thousands of liters, and some have adopted computer-controlled production . For blow plastics are polyethylene, polyvinyl chloride, polypropylene, polyester, etc. , resulting into the empty containers are widely used in industrial packaging containers.

According to the production method of the parison , blow molding and extrusion blow molding can be divided into the injection blow molding, a newly developed multi-layer blow molding and stretch blow molding.

 

 Prospects    In recent years , with the development of a variety of functional beverages and wine packaging market , a variety of multi-layer co-injection - blow molding technology become a hot market .

Flexible step production technology

Injection stretch blow molding hollow articles having uniform thickness, good dimensional stability, light weight , high strength , etc., and therefore a very wide range of applications . As the injection stretch blow container craft production mostly PET, PP, PE, PVC and other materials as raw materials, and the use of these raw materials to produce bottles with light, portable, non-toxic , transparent, unbreakable , good barrier properties , etc., making it more and more as an alternative medicinal bottles were used in carbonated drinks, juice drinks , water , edible oil , alcohol , cosmetic products, pharmaceuticals and other industries packaging.

Injection stretch blow a two-stepprocessing method and one-step process . One step from raw material to complete the entire container molding process on a single device. Two-step process from the raw materials needed to complete the two devices to products molding process . Two-step method is mainly suitable for mass production , and flexibility, both equipped with a multiple injection blow molding machine can also be equipped with more than one injection blow molding machine . Of course, this should be based on production to match the main injection machine and blowing may be.