Plastic blow molding technique is developing rapidly for plastic
process . The thermoplastic resin obtained by
extrusion or injection molding of plastic tubular parison hot ( heated or
softened state ) , placed inside the mold cavity , then closed mold immediately,
pour into air, blowing the
plastic parison inflation and close to the inner wall of the mold cavity,
cooled mold , that get all kinds of hollow plastic products.
According to the production method of the
parison , blow molding and extrusion blow molding can be divided into the
injection blow molding, a newly developed multi-layer blow molding and stretch
blow molding.
Flexible step production technology
Injection stretch blow molding hollow
articles having uniform thickness, good dimensional stability, light weight ,
high strength , etc., and therefore a very wide range of applications . As the
injection stretch blow container craft production mostly PET, PP, PE, PVC and
other materials as raw materials, and the use of these raw materials to produce
bottles with light, portable, non-toxic , transparent, unbreakable , good
barrier properties , etc., making it more and more as an alternative medicinal
bottles were used in carbonated drinks, juice drinks , water , edible oil ,
alcohol , cosmetic products, pharmaceuticals and other industries packaging.
Injection stretch blow a two-stepprocessing method and one-step process . One step from raw material to complete
the entire container molding process on a single device. Two-step process from
the raw materials needed to complete the two devices to products molding process
. Two-step method is mainly suitable for mass production , and flexibility,
both equipped with a multiple injection blow molding machine can also be
equipped with more than one injection blow molding machine . Of course, this
should be based on production to match the main injection machine and blowing
may be.
没有评论:
发表评论